aws_network_firewall_rule_group Resource
Use the aws_network_firewall_rule_group InSpec audit resource to test properties of a single specific AWS Network Firewall rule group.
The AWS::NetworkFirewall::RuleGroup resource defines a reusable collection of stateless or stateful network traffic filtering rules.
For additional information, including details on parameters and properties, see the AWS documentation on AWS Network Firewall Rule Group.
Installation
This resource is available in the Chef InSpec AWS resource pack.
See the Chef InSpec documentation on cloud platforms for information on configuring your AWS environment for InSpec and creating an InSpec profile that uses the InSpec AWS resource pack.
Syntax
Ensure that the firewall exists.
describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
it { should exist }
end
Parameters
rule_group_name(required)-
The descriptive name of the rule group.
Properties
update_token- A token used for optimistic locking.
rule_group.rule_variables.ip_sets- A list of IP addresses and address ranges, in CIDR notation.
rule_group.rule_variables.ip_sets["RuleVariableName"].definition- The list of IP addresses and address ranges, in CIDR notation.
rule_group.rule_variables.port_sets- A list of port ranges.
rule_group.rule_variables.port_sets["RuleVariableName"].definition- The set of port ranges.
rule_group.rules_source.rules_string- Stateful inspection criteria, provided in Suricata compatible intrusion prevention system (IPS) rules.
rule_group.rules_source.rules_source_list.targets- The domains that you want to inspect for in your traffic flows.
rule_group.rules_source.rules_source_list.target_types- The protocols you want to inspect. Specify TLS_SNI for HTTPS.
rule_group.rules_source.rules_source_list.generated_rules_type- Whether you want to allow or deny access to the domains in your target list.
rule_group.rules_source.stateful_rules- The 5-tuple stateful inspection criteria.
rule_group.rules_source.stateful_rules.first.action- Defines what Network Firewall should do with the packets in a traffic flow when the flow matches the stateful rule criteria.
rule_group.rules_source.stateful_rules.first.header.protocol- The protocol to inspect for.
rule_group.rules_source.stateful_rules.first.header.source- The source IP address or address range to inspect for, in CIDR notation.
rule_group.rules_source.stateful_rules.first.header.source_port- The source port to inspect for.
rule_group.rules_source.stateful_rules.first.header.direction- The direction of traffic flow to inspect.
rule_group.rules_source.stateful_rules.first.header.destination- The destination IP address or address range to inspect for, in CIDR notation.
rule_group.rules_source.stateful_rules.first.header.destination_port- The destination port to inspect for.
rule_group.rules_source.stateful_rules.first.rule_options- Additional settings for a stateful rule.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules- Defines the set of stateless rules for use in a stateless rule group.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.sources- The source IP addresses and address ranges to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.sources.first.address_definition- Specify an IP address or a block of IP addresses in Classless Inter-Domain Routing (CIDR) notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destinations- The destination IP addresses and address ranges to inspect for, in CIDR notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destinations.first.address_definition- Specify an IP address or a block of IP addresses in Classless Inter-Domain Routing (CIDR) notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports- The source ports to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports.first.from_port- The lower limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports.first.to_port- The upper limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports- The destination ports to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports.first.from_port- The lower limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports.first.to_port- The upper limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.protocols- The protocols to inspect for, specified using each protocol’s assigned internet protocol number (IANA).
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags- The TCP flags and masks to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags.first.flags- Used in conjunction with the Masks setting to define the flags that must be set and flags that must not be set in order for the packet to match.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags.first.masks- The set of flags to consider in the inspection.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.actions- The actions to take on a packet that matches one of the stateless rule definition’s match attributes.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.priority- A setting that indicates the order in which to run this rule relative to all of the rules that are defined for a stateless rule group.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions- Defines an array of individual custom action definitions that are available for use by the stateless rules in this StatelessRulesAndCustomActions specification.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_name- The descriptive name of the custom action.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_definition.publish_metric_action.dimensions- The value to use in an Amazon CloudWatch custom metric dimension.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_definition.publish_metric_action.dimensions.first.value- The value to use in the custom metric dimension.
rule_group_response.rule_group_arn- The Amazon Resource Name (ARN) of the rule group.
rule_group_response.rule_group_name- The descriptive name of the rule group.
rule_group_response.rule_group_id- The unique identifier for the rule group.
rule_group_response.description- A description of the rule group.
rule_group_response.type- Indicates whether the rule group is stateless or stateful.
rule_group_response.capacity- The maximum operating resources that this rule group can use.
rule_group_response.rule_group_status- Detailed information about the current status of a rule group.
rule_group_response.tags- The key:value pairs to associate with the resource.
Examples
Ensure an update token is available.
describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
its('update_token') { should eq 'UPDATE_TOKEN' }
end
Ensure that the rule group arn is RuleGroupARN.
describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
its('rule_group_response.rule_group_arn') { should eq 'ARN' }
end
Matchers
This InSpec audit resource has the following special matchers. For a full list of available matchers, please visit our Universal Matchers page.
The controls will pass if the describe method returns at least one result.
exist
Use should to test that the entity exists.
describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
it { should exist }
end
Use should_not to test the entity does not exist.
describe aws_network_firewall_rule_group(rule_group_name: 'dummy') do
it { should_not exist }
end
be_available
Use should to check if the entity is available.
describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
it { should be_available }
end
AWS Permissions
Your Principal will need the NetworkFirewall:Client:DescribeRuleGroupResponse action with Effect set to Allow.
Was this page helpful?